video on demandCreate a virtual network interface over existing physical interface net0 with address 192.168.0.80:
# dladm create-vnic -l net0 vnic0
# ipadm create-ip vnic0
# ipadm create-addr -T static -a 192.168.0.80 vnic0/v4
Create two virtual network interfaces over a virtual switch (without a physical network interface):
# dladm create-etherstub stub0
# dladm create-vnic -l stub0 vnic0 # dladm create-vnic -l stub0 vnic1
Reduce the bandwidth of the virtual network interface vnic0 to 100Mbps:
# dladm set-linkprop -p maxbw=100 vnic0
Restrict the bandwidth going to IP address 192.168.0.30 by creating a flow on virtual network interface vnic0, then restrict its bandwidth to 50Mbps:
# flowadm add-flow -l vnic0 -a remote_ip=192.168.0.30 flow0 # flowadm set-flowprop -p maxbw=50 flow0
Restrict network traffic to TCP for a local port 443 for network interface net0:
# flowadm add-flow -l net0 -a transport=TCP,local_port=433 flow0
Activating Jumbo Frames (ethernet packets greater than 1500 bytes):
# dladm set-linkprop -p mtu=9000 net0
Configure Link Aggregation:
# dladm create-aggr -l net0 -l net1 aggr0
# ipadm create-ip aggr0
# ipadm create-addr -T static -a 10.1.1.2/24 aggr0/v4
Configure VLANS:
# dladm create-vlan -l net0 -v 100 administration1
# dladm create-vlan -l net0 -v 2 production1
# ipadm create-ip administration1
# ipadm create-ip production1
# ipadm create-addr -T static -a 192.168.2.2/24 \ administration1/v4static
# ipadm create-addr -T static -a 192.168.1.2/24 \ production1/v4static
Configure an IPMP group:
# ipadm create-ip net0
# ipadm create-ip net1
# ipadm create-ip net2
# ipadm create-ipmp ipmp0
# ipadm add-ipmp -i net0 -i net1 -i net2 ipmp0
# ipadm create-addr -T static -a 192.168.1.27/24 ipmp0/v4
# ipadm create-addr -T static -a 192.168.1.50/24 net0/test
# ipadm create-addr -T static -a 192.168.1.51/24 net1/test
# ipadm create-addr -T static -a 192.168.1.52/24 net2/test