Monthly Archives: July 2012

clustermode switches

You need two cluster network switches and two management network switches for a Cluster-Mode configuration. The following cluster network switches are supported: • Cisco NX5010 You can install the Cisco NX5010 switch in a NetApp system cabinet with the custom … Continue reading

Posted in netapp | Leave a comment

clustermode best practice

access the clustershell via the clustermanagement lifto use element manager: webbased-connect to cluster *either node or clusterlif* 

Posted in netapp | Leave a comment

clustermode striped volumes

New customers will not be able to run striped volumes (neither coral nor acro) coral -> one metadatavolume acro -> metainformation is spread accross all parts of the volume.

Posted in netapp | Leave a comment

clustermode pdfs

http://static.usenix.org/event/fast07/tech/full_papers/eisler/eisler.pdf http://media.netapp.com/documents/tr-3964.pdf

Posted in netapp | Leave a comment

clustermode loadsharing writes

writing to a volume that is an ls-volume will fail if the rootvolume is mounted as / writing to a volume that is an ls-volume will succeed (to the N-blade that houses the rw-data-vol) if the rootvolume is mounted as … Continue reading

Posted in netapp | Leave a comment

clustermode backup

backup daily and hourly backups created by schedule in /mroot/etc/backups/ create/show/upload/download/rename/copy/settings can be uploaded via http or ftp

Posted in netapp | Leave a comment

clustermode spm

set -privilege diag spm show

Posted in netapp | Leave a comment

clustermode logs

/var/log (after vol0 is available)systemshell /mroot/etc/log   set diag debug log show debug log view event log show needs work……

Posted in netapp | Leave a comment

clustermode schedules

Any schedule can be used by any Vserver. job schedule show 5min cron @:00,:05,:10,:15,:20,:25,:30,:35,:40,:45,:50,:55 8hour cron @2:15,10:15,18:15 RepositoryBalanceMonitorJobSchedule interval Every 1h avUpdateSchedule cron @2:00 daily cron @0:10 hourly cron @:05 weekly cron Sun@0:15 volume snapshot policy show default 3 true … Continue reading

Posted in netapp | Leave a comment

clustermode boot (clustermode or 7mode)

CFE> printenv CFE> setenv bootarg.init.boot_clustered false CFE> setenv bootarg.init.boot_clustered true

Posted in netapp | Leave a comment

clustermode users ndmp

security login show (shows users per vserver username application authmethod role name acct-locked)   security login role show (shows roles per vserver rolename commanddirectory access-level)   step by step: (on a per node basis) security login role create -role ndmp … Continue reading

Posted in netapp | Leave a comment

clustermode dr

there is NO SNAPVAULT! NO qtree snapmirror and NO synchronous Snapmirror   snapmirror for load sharing or dataprotection are done via the cluster-network volume snapshot promote snapmirror restore OR snapmirror promote   there still is a snapmirror break command.   … Continue reading

Posted in netapp | Leave a comment

clustermode ndmp

ndmpcopy cannot be run from nodeshell or clustershell. you need a third player to run ndmp from. Netapp also says you should not backup seperate Vservers! ndmpclient only sees the node, not the Vserver.   Backing up data on a … Continue reading

Posted in netapp | Leave a comment

clustermode snapdrive

In clustermode you need a management lif next to the datalifs for the iSCSI protocol on a per vserver basis. The management lif needs a user to allow snapdrive to manage your luns. My clustername : cluster My Vservername : … Continue reading

Posted in netapp | Leave a comment

clustermode iscsi (2)

1. create vserver vserver create -vserver vsi1 -rootvolume vsi1_root -aggregate aggr1 -ns-switch file -nm-switch file -rootvolume-security-style ntfs   2. enable iscsi protocol vserver iscsi create -vserver vsi1 -target-alias vsi1-status up   3. vserver iscsi show   4. * network interface … Continue reading

Posted in netapp | Leave a comment

clustermode iscsi (1)

1. create vserver vserver create -vserver vsi1-rootvolume vsi1_root -aggregate aggr1 -ns-switch file -nm-switch file -rootvolume-security-style ntfs 2. enable iscsi protocole vserver iscsi create -vserver vsi1-target-alias vsi1-status up 3. vserver iscsi show 4. network interface create -vserver vsi1 ilif1 -role data-protocol … Continue reading

Posted in netapp | Leave a comment

clustermode note!

allowed protocols on lifs: cannot mix nas and san igroups : iscsi and fcp for 1 igroup

Posted in netapp | Leave a comment

clustermode automatic login

https://kb.netapp.com/support/index?page=content&id=1012542 ===== Create a file to be used as the authorized keys file on the cluster. In the example below, ssh-keygen is used on a Linux box: monitor@bjacobs-lnx:/$ ssh-keygen -q -f ~/.ssh/id_rsa -t rsa Enter passphrase (empty for no passphrase): … Continue reading

Posted in netapp | Leave a comment

clustermode usermapping

vserver name-mapping create -vserver v2 -direction win-unix -position 1 -pattern netapp.local\\\\administrator -replacement root vserver name-mapping create -vserver v2 -direction unix-win -position 1 -pattern root -replacement netapp.local\\\\administrator vserver name-mapping show set diag diag secd name-mapping show -node cl1-01 -vserver v2 -direction … Continue reading

Posted in netapp | Leave a comment

clustermode unix user

vserver services unix-user create -vserver vs2 -user pcuser -d 65534 -primary-gid 65534 (also root 0 1) (also administrator 10 0) vserver services unix-user show -vserver vs2 vserver services unix-group create -vserver vs2 -name root 0 (also daemon 1) vserver services … Continue reading

Posted in netapp | Leave a comment

clustermode ping

network ping -node cl1-01 10.10.0.10

Posted in netapp | Leave a comment

clustermode cifs server

vserver create -vserver win5 -rootvolume root -aggregate gr02_aggr1 -ns-switch file -nm-switch file -rootvolume-security-style unix -language C net int create -vserver win5 -lif lif1 -role data -data-protocol nfs,cifs,fcache -home-node gr-01 -home-port e0c -address 192.168.4.34 -netmask 255.255.255.0 -status-admin up vserver services dns … Continue reading

Posted in netapp | Leave a comment

clustermode ntp server manually

ntp server create -node cl1-01 -server 10.10.0.10 ntp server create -node cl1-02 -server 10.10.0.10 ntp config modify -enabled false date mmddhhmm    

Posted in netapp | Leave a comment

clustermode vserver create

vserver setup   1. name 2. protocol configured (nfs/cifs/iscsi/fcp) 3. nameservice (ldap/nis/dns) 4. aggregate for rootvolume 5. volume language *rootvolume is created* 6. create datavolume? [yes] 7. volume name 8. aggregate for datavol 9. size 10. junctionpath *if path is … Continue reading

Posted in netapp | Leave a comment

cdot network roles

roles: cluster (important) data (important) node-mgmt cluster-mgmt intercluster (snapmirror to other cluster (future)) command : net int show net int create  

Posted in netapp | Leave a comment

clustermode network

cluster-interconnect network management network data network management and data may be combined on same ports

Posted in netapp | Leave a comment

clustermode blade

N-blade – nfs/cifs spinNP   SCSI-blade – FC/SCSI spinNP ============== CSM communication mechanism between top blades and D-blade reliable transport for SpinNP over UDP/IP used locally as well as remotely ============== D-blade handles writes to wafl speaks SpinNP speaks FC … Continue reading

Posted in netapp | Leave a comment

clustermode rdb

repicated database = ring of atomically updated database of which one node is the master. rdb communication is like the heartbeat.   rdb units: bcom (block configuration and operations manager : vldb ( volume location database) : vifmgr : management … Continue reading

Posted in netapp | Leave a comment

clustermode put node in maintenance mode (offline)

To take a node out of the cluster for a longer time. run: system node modify -node <node> -eligibility false

Posted in netapp | Leave a comment

clustermode create vserver

vserver create -vserver vs5 -rootvolume vs5_root -aggregat aggr1 \ -ns-switch file -rootvolume-security-style unix   network interface create -vserver vs5 -lif data1 -role data \ -home-node cl1-u01 -home-port e0c -address 10.10.0.67 \ -netmask 255.255.255.0   vol create -vserver vs5 -volume nas … Continue reading

Posted in netapp | Leave a comment

clustermode nfs

vserver create -vserver vs5 -rootvolume vs5_root -rootvolume-security-style unix \\ -aggregate aggr1 -ns-switch file   vol create -volume vs5_nas -aggregate aggr1 -size 100m -security-style unix \\ -junction-path /nfs5vol -vserver vs5   net int create -vserver vs5 -lif vs5nas -role data -data-protocol … Continue reading

Posted in netapp | Leave a comment

clustermode offline vserver

Offlining vserver:   vol offline -vserver vs4 -volume vs4_root vol delete -vserver vs4 -volume vs4_root

Posted in netapp | Leave a comment

clustermode disk ownership

. Get disk info and change owner storage disk show storage disk modify -disk v4.23 -owner cl1-01 storage disk zerospares   2. Create aggregate storage aggregate create -aggregate aggr3 8 (aggr names must be unique in the cluster) storage aggregate … Continue reading

Posted in netapp | Leave a comment

clustermode vserver

Vserver setup (enter vservername) : vs3-lun (enter protocol) : iscsi (enter ns) : dns (enter aggr) : aggr1 This creates a rootvol of 20m.   (enter datavol to create) : vs3_lun_vol (enter aggr for this vol) : aggr1 (enter size … Continue reading

Posted in netapp | Leave a comment

clustermode privileges

Change privilege level set -privilege advanced set admin   1. Get to the node shell system node run -node cl1-01   2. Get to the system shell set advanced security login unlock -username diag security login password -username diag ***** … Continue reading

Posted in netapp | Leave a comment

solaris ssh slow login

in sshd_config add LookupClientHostnames no VerifyReverseMapping no GSSAPIAuthentication no on cli run # cryptoadm disable provider=/usr/lib/security/\$ISA/pkcs11_tpm.so mechanism=all # cryptoadm uninstall provider=/usr/lib/security/\$ISA/pkcs11_tpm.so

Posted in solaris | Leave a comment

solaris network admin training

# ipadm show-if # ipadm show-addr # ipadm create-ip net3 # ipadm create-addr -T static -a 192.168.0.203/24 net3/v4 # ipadm down-addr net3/v4 # ipadm up-addr net3/v4 # ipadm delete-addr net3/v4 # ipadm delete-ip net3 —– IPMP daemon: in.mpathd IPMP service: svc:/network/ipmp Configuration file: /etc/default/mpathd IPMP display … Continue reading

Posted in Uncategorized | Leave a comment

http-equiv

<html> <head> <meta http-equiv=”Refresh” content=”0; url=http://uadmin.nl/init” /> </head> </html>

Posted in Uncategorized | Leave a comment

vmrun

Command Line Application VMware Workstation includes a separate application, vmrun, for operating teams or virtual machines from the command line. VMware Workstation includes a separate application, vmrun, for operating teams or virtual machines from the command line. To launch the vmrun application, … Continue reading

Posted in Virtualization | Leave a comment

dmidecode

lists all your hardware…how much memory do I physically recognize? (CENTOS) dmidecode -t processor # dmidecode 2.11 SMBIOS 2.7 present. Handle 0x0004, DMI type 4, 42 bytes Processor Information Socket Designation: CPU 1 Type: Central Processor Family: Core i5 Manufacturer: … Continue reading

Posted in linux | Leave a comment

Linux iSCSI

CentOS / Red Hat Linux: Install and manage iSCSI Volume by VIVEK GITE on OCTOBER 30, 2007 · 45 COMMENTS· LAST UPDATED FEBRUARY 18, 2011 Internet SCSI (iSCSI) is a network protocol s that allows you to use of the SCSI protocol over TCP/IP networks. It is … Continue reading

Posted in linux | Leave a comment