linux zfs

$ cat /etc/redhat-release
CentOS release 6.2 (Final)
The build process is quite easy. Prior to compiling source code you will need to install a few dependencies:
$ yum install kernel-devel zlib-devel libuuid-devel libblkid-devel libselinux-devel parted lsscsi
Once these are installed you can retrieve and build spl and zfs packages:
$ wget http://github.com/downloads/zfsonlinux/spl/spl-0.6.0-rc6.tar.gz
$ tar xfvz spl-0.6.0-rc6.tar.gz && cd spl*6
$ ./configure && make rpm
$ rpm -Uvh *.x86_64.rpm
Preparing... ########################################### [100%]
1:spl-modules-devel ########################################### [ 33%]
2:spl-modules ########################################### [ 67%]
3:spl ########################################### [100%]
$ wget http://github.com/downloads/zfsonlinux/zfs/zfs-0.6.0-rc6.tar.gz
$ tar xfvz zfs-0.6.0-rc6.tar.gz && cd zfs*6
$ ./configure && make rpm
$ rpm -Uvh *.x86_64.rpm
Preparing... ########################################### [100%]
1:zfs-test ########################################### [ 17%]
2:zfs-modules-devel ########################################### [ 33%]
3:zfs-modules ########################################### [ 50%]
4:zfs-dracut ########################################### [ 67%]
5:zfs-devel ########################################### [ 83%]
6:zfs ########################################### [100%]
If everything went as planned you now have the ZFS kernel modules and userland utilities installed! To begin using ZFS you will first need to load the kernel modules with modprobe:
$ modprobe zfs
To verify the module loaded you can tail /var/log/messages:
Feb 12 17:54:27 centos6 kernel: SPL: Loaded module v0.6.0, using hostid 0x00000000
Feb 12 17:54:27 centos6 kernel: zunicode: module license 'CDDL' taints kernel.
Feb 12 17:54:27 centos6 kernel: Disabling lock debugging due to kernel taint
Feb 12 17:54:27 centos6 kernel: ZFS: Loaded module v0.6.0, ZFS pool version 28, ZFS filesystem version 5
And run lsmod to verify they are there:
$ lsmod | grep -i zfs
zfs 1038053 0
zcommon 42478 1 zfs
znvpair 47487 2 zfs,zcommon
zavl 6925 1 zfs
zunicode 323120 1 zfs
spl 210887 5 zfs,zcommon,znvpair,zavl,zunicode
To create our first pool we can use the zpool utilities create option:
$ zpool create mysqlpool mirror sdb sdc
The example above created a mirrored pool out of the sdb and sdc block devices. We can see this layout in the output of `zpool status`:
$ zpool status -v
pool: mysqlpool
state: ONLINE
scan: none requested
config:

NAME STATE READ WRITE CKSUM
mysqlpool ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
sdb ONLINE 0 0 0
sdc ONLINE 0 0 0

errors: No known data errors
Awesome! Since we are at pool version 28 lets disable atime updates and enable compression and deduplication:
$ zfs set compression=on mysqlpool
$ zfs set dedup=on mysqlpool
$ zfs set atime=off mysqlpool
For a somewhat real world test, I stopped one of my MySQL slaves, mounted the pool on /var/lib/mysql, synchronized the previous data over to the ZFS file system and then started MySQL. No errors to report, and MySQL is working just fine. Next up, I trash one side of the mirror and verified that resilvering works:
$ dd if=/dev/zero of=/dev/sdb
$ zpool scrub mysqlpool
I let this run for a few minutes then ran `zpool status` to verify the scrub fixed everything:
$ zpool status -v
pool: mysqlpool
state: ONLINE
status: One or more devices has experienced an unrecoverable error. An
attempt was made to correct the error. Applications are unaffected.
action: Determine if the device needs to be replaced, and clear the errors
using 'zpool clear' or replace the device with 'zpool replace'.
see: http://www.sun.com/msg/ZFS-8000-9P
scan: scrub repaired 966K in 0h0m with 0 errors on Sun Feb 12 18:54:51 2012
config:

NAME STATE READ WRITE CKSUM
mysqlpool ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
sdb ONLINE 0 0 175
sdc ONLINE 0 0 0
I beat on the pool pretty good and didn’t encounter any hangs or kernel oopses. The file systems port is still in its infancy, so I won’t be trusting it with production data quite yet. Hopefully it will mature in the coming months, and if we’re lucky maybe one of the major distributions will begin including it! That would be killer!!